Efficacy of selected pretreatment processes in the mitigation of low-pressure membrane fouling and its correlation to their removal of microbial DOM

Abstract

Membrane fouling by dissolved organic matter (DOM), especially microbially-derived DOM, is a major challenge for ultrafiltration (UF) membranes in water purification. Fouling may be mitigated by pretreating feed waters; however, there are no comprehensive studies that compare the fouling reduction efficacies across different pretreatment processes. Further, there is a limited understanding of the relationship between fouling reduction efficacy and microbially-derived DOM removal from source waters. Accordingly, the objectives of this study were to: (i) evaluate and compare the efficacies of five pretreatment processes in reducing UF membrane fouling by DOM; and (ii) investigate whether a relationship exists between membrane fouling reduction and microbially-derived DOM removal by pretreatment processes. We investigated seven water sources and a polyvinylidene fluoride hollow-fiber UF membrane using bench-scale fouling tests. Dissolved organic carbon content, ultraviolet absorbance and fluorescence excitation-emission matrix spectroscopy were used to assess DOM concentration and composition. Alum and ferric chloride coagulation were the most effective pretreatment processes in reducing membrane fouling, anion exchange was moderately effective, and PAC adsorption and chlorine pre-oxidation were the least effective. Consistent with previous studies, microbially-derived DOM was the major contributor to UF membrane fouling regardless of water source or pretreatment type. Fouling reduction was strongly correlated with the reduction of microbially-derived DOM in foulant layers but not from source waters. This result indicates that a fraction of the total microbially-derived DOM in feed waters was responsible for UF fouling. Overall, pretreatment processes that remove microbially-derived DOM are well-suited for UF membrane fouling reduction.