Abstract
To verify the effects of water flooding speed (i.e. water injection rate) on oil recovery efficiency and residual oil distribution in heterogenous reservoirs, water flooding experiments with different flooding speed are carried out in microheterogenous cores, vertically heterogenous cores, and areally heterogenous cores. In the experiments, the cores are sequentially saturated with synthetic brine and synthetic oil, and then flooded with synthetic brine with different injection rates. The results demonstrate that the increase of flooding speed shortens water-free production period and decreases oil recovery efficiency for all the three kinds of heterogenous cores, resulting in more residual oil in the cores. This is because higher flooding speed forms preferential pathways in high permeable areas, inducing inferior sweep efficiency in low permeable areas. This unfavorable effect of higher flooding speed overrides the favorable effects on the recovery of oil droplets trapped in pore throats and pore dead-ends and oil films on pore surfaces, making more residual oil left in the low permeable areas of the cores and decreasing the ultimate oil recovery efficiency. These findings could provide in-depth knowledge on the effects of water flooding speed on oil recovery efficiency and residual oil distribution.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
