Abstract
Structural, gaseous phase hydrogen storage, and electrochemical properties of a series of annealed (900 °C for 12 h) Laves phase-related body-centered-cubic (BCC) solid solution metal hydride (MH) alloys with vanadium/nickel (V/Ni) contents ranging from 44/18.5 to 28/34.5 were studied. As the average Ni-content increases, C14 phase evolves into the C15 phase and a new σ-VNi phase emerges; lattice constants in BCC, C14, and TiNi phase all decrease; the main plateau pressure increases; both gaseous phase and electrochemical hydrogen storage capacities decrease; the pressure-concentration-temperature (PCT) absorption/desorption hysteresis decreases; both high-rate dischargeability (HRD) and bulk hydrogen diffusivity increase and then decrease; and the surface reaction current decreases. There is a capacity-rate tradeoff with the change in V/Ni content. Alloys with relatively lower Ni-content show higher capacities but inferior high-rate performance compared to commercially available AB5 MH alloy. Increasing the Ni-content in this BCC-based multi-phase alloy can improve the high-rate capability over AB5 alloy but with lower discharge capacities. The inferior surface reaction current in these alloys, compared to AB5, may be due to the smaller surface area, not the total volume, of the Ni clusters embedded in the surface oxide layer of the activated alloys.
Highlights
Introduction“Laves phase-related body-centered-cubic (BCC) solid solution” is a family of metal hydride (MH)
Structural, gaseous phase hydrogen storage, and electrochemical properties of a series of annealed (900 °C for 12 h) Laves phase-related body-centered-cubic (BCC)
Alloys composed mainly of a BCC phase and a Laves phase, which can be used as the negative electrode active material for nickel/metal hydride (Ni/MH) batteries [1,2]
Summary
“Laves phase-related body-centered-cubic (BCC) solid solution” is a family of metal hydride (MH). Alloys composed mainly of a BCC phase and a Laves phase (mostly C14), which can be used as the negative electrode active material for nickel/metal hydride (Ni/MH) batteries [1,2]. Other minor phases, such as C15, TiNi, Ti2Ni, and VNi can be included. Our contributions to the field include the introduction of a high hydrogen pressure activation process [24], an optimization of annealing conditions (900 °C for 12 h) [25], and a study examining the contributions of the constituent elements in Laves phase-related BCC solid solutions. In order to further improve the HRD performance, the vanadium/nickel content in alloy P17 was adjusted and the results are presented here
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
