Abstract

Vacancy-type defects in Mg-implanted GaN were probed by using a monoenergetic positron beam. Mg ions were implanted into GaN to obtain 0.3-μm-deep box profiles with Mg concentrations of 1 × 1019 cm−3. The major defect species in an as-implanted sample was determined to be Ga-vacancy related defects such as a complex between Ga and N vacancies. The sample was annealed under a nitrogen pressure of 1 GPa in a temperature range of 1000–1480 °C without a protective capping layer. Compared with the results for Mg-implanted GaN annealed with an AlN capping layer, the defect concentration was decreased by the cap-less annealing, suggesting that the surface of the sample was an effective sink for vacancies migrating toward the surface. Depth distributions of Mg after annealing above 1300 °C were influenced by the presence of residual vacancies at this temperature. Hydrogen atoms were unintentionally incorporated into the sample during annealing, and their diffusion properties were also affected by both vacancies and Mg.

Highlights

  • For the as-implanted sample and ones annealed at 1000–1200 °C, the S values were larger than S for defect-free Gallium nitride (GaN), which can be attributed to the trapping of positrons by vacancy-type defects

  • The positron annihilation technique was used to study behaviors of vacancy-type defects in Mg-implanted GaN annealed without a protective capping layer

  • The major defect species in the as-implanted GaN was identified as VGa-related defects such as VGaVN

Read more

Summary

Introduction

Compared with the results for Mg-implanted GaN annealed with an AlN capping layer, the defect concentration was decreased by the cap-less annealing, suggesting that the surface of the sample was an effective sink for vacancies migrating toward the surface. We used a monoenergetic positron beam to study the annealing behaviors of vacancy-type defects in Mg-implanted GaN with UHPA.

Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call