Abstract
Chemical, thermal properties, surface characteristics, termite resistance and physico-mechanical properties of urea formaldehyde-bonded oil palm trunk particleboard post heat-treated in palm oil were investigated. Oven dried samples were immersed in palm oil for 24 h prior to expose to temperature of 180, 200 and 220 °C in a laboratory oven for 2 h. Alternation in the chemical composition of treated samples was investigated using Fourier transform infrared spectroscopy (FTIR) analysis. Thermal properties analysis was conducted using Thermogravimetric (TG) and Different scanning calorimetric (DSC) analysis. Surface characteristics were checked using scanning electron microscopy (SEM) while resistance against subterranean termite, Coptotermes curvignathus, was evaluated. Physcial and mechanical properties of the samples was assessed based on anti-swelling efficiency (ASE), water repellency efficiency (WRE), bending and internal bonding strength. Degradation of hemicellulose shown in FTIR spectra has contributed to the improvement in dimensional stability. Oil-covered particles as shown in SEM give the particleboard lower water uptake. Treated samples also possess better thermal stability and better resistance against termites as the weight loss caused by termites reduced from 25.6% to 11.0%. Generally, improvement in dimensional stability accompanied by severe reduction in mechanical strength were recorded in the treated samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
