Abstract
AbstractThe chemical properties, dimensional stability, mechanical strength and termite resistance of urea formaldehyde (UF) bond rubberwood (RW) particleboard (PB) were assessed after a two-step oil heat treatment (OHT). The PB was immersed in palm oil before heating to 180, 200, and 220°C in a laboratory oven for 2 h. Anti-swelling efficiency (ASE) and water repellency efficiency (WRE) as well as bending (MOE, MOR) and internal bonding strength (IB) were determined. Resistance against a subterranean termite,Coptotermes curvignathusHolmgren, was tested. The degradation of hemicelluloses and cellulose, that are mainly responsible for wood wetting processes, was confirmed by Fourier transform infrared (FTIR) spectra. Formation of an elevated cross-linking density in lignin also contributed to the dimensional stability, where 93.6% ASE and 46.3% WRE were achieved in the samples treated at 220°C. Mechanical properties of treated samples were inferior to the control samples due to hemicelluloses degradation and breakage of the UF bonding network. A significant improvement in termite resistance has been found in the treated samples.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
