Abstract
Abstract Solar cells based on pentacene/C 60 bilayer heterojunctions have been fabricated with a structure of ITO/poly(styrenesulfonate) (PEDOT:PSS)/pentacene (40 nm)/fullerene (C 60 )(40 nm)/2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) (10 nm)/Al. The effect of pentacene crystalline domain size on performance was investigated by controlling the pentacene deposition rate. The devices show improved light-to-electricity conversion efficiencies from 0.49% to 1.12% under an AM 1.5 solar simulator (100 mW/cm 2 ), when the pentacene evaporation rate is in a range of 5 A/s–0.5 A/s. Atomic force microscopy (AFM) measurements show that the pentacene films deposited by a slow evaporation rate have larger crystalline domains and a fewer amorphous domains, compared to films obtained by faster evaporation rates. Upon thermal annealing at 200 °C for 1 min, there is merging of pentacene crystalline domains. These changes in film morphology impact the charge separation at the donor/acceptor interface and the hole and electron mobilities, and hence, directly affect the device performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
