Abstract
T800 carbon fiber/high-temperature epoxy resin composites with holes were subjected to thermal–oxidative aging, and the effects of different aging temperatures and times on the composite properties were investigated. The mass loss, surface topography, open-hole tensile performance, fracture morphologies, dynamic mechanical properties, and infrared spectra were analyzed. The results showed that chemical aging did not occur with thermal–oxidative aging at 70°C and 130°C. However, chemical aging occurred at 190°C. At 70°C, 130°C, and 190°C, all samples showed a slight increase followed by a slight decrease and stabilization in the open-hole tensile strength. The open-hole tensile strength was maximized after 240 h aging at different temperatures; the open-hole tensile strength after 1920 h aging exceeded that of the unaged samples. All composites experienced through-hole failure. With aging, the glass transition temperature ( T g) was gradually increased and then decreased. After 960 h aging at different temperatures, T g was maximized.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
