Abstract
PurposeTo evaluate the effects of the application of universal adhesive with manual brush (MB) or rotary brush (RB), in the etch-and-rinse (ER) or self-etching (SE) strategy, on the bond strength, adhesive layer thickness, and adhesive failure pattern to dentin impregnated with bioceramic sealer, at 24 h and 1 year. Materials and methodsEighty-eight bovine incisor crowns were impregnated with bioceramic sealer was kept for 15 min and cleaned with cotton soaked in distilled water. They were then divided into four groups (n = 22): ER-MB, ER-RB, SE-MB, SE-RB. Subsequently, the specimens were restored with Filtek Z-250 resin. The adhesive layer thickness was individually analyzed using laser confocal microscope. Bond strength was assessed through microtensile testing, and the failure pattern was examined using a stereomicroscope. Data were analyzed by one-way ANOVA/Tukey's tests (α = 0.05). ResultsThe adhesive layer thickness provided by ER-MB and SE-MB was greater than that provided by ER-RB and SE-RB (P < 0.05). ER-MB showed the lowest bond strength at 24 h (P < 0.05). At 1 year, SE-MB and SE-RB exhibited the highest bond strength values (P < 0.05). ER-MB demonstrated a higher incidence of adhesive failure at 24 h. At 1 year, SE-RB and SE-MB showed a higher incidence of mixed failure. ConclusionThe use of Scotchbond Universal® adhesive in the etch-and-rinse strategy applied with a MB negatively affects bond strength at 24 h, worsening after 1 year of control, regardless of the application protocol.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call