Abstract
In this study, the influence of direct steam injection (DSI) on the performance and emissions of marine engines is investigated. Simulation models are developed and tested based on experimental data. Steam is obtained by waste heat recovery in a marine engine. The limitations of DSI parameters are investigated based on the exhaust gas temperature. The steam quantity and temperature decrease with a decrease in load. The results show that steam mass plays an important role in NOx reduction and improving power. For a steam/fuel ratio of 1.27 at 100% load, the brake power improved by 3.09% and NOx emissions decreased by 4.67%. A higher degree of improvement is obtained with an increase in steam mass. The steam temperature and injection timing only slightly influenced the brake power and NOx emissions. When steam-injection timing improved to 12°CA at 100% load with injection duration decreasing from 85°CA to 25°CA, brake power improved from 3,485.7 to 3,529.7 kW. All of this demonstrates that the DSI approach has excellent energy-saving and emission reduction potential for marine engines. The steam-injection strategy should be optimized in the future.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call