Effects of soldering temperatures and composition on the microstructures and shear properties of Sn58Bi-xSAC0307/ENIG solder joints

Abstract

PurposeThis paper aims to systematically study the effects of reflow temperature and SAC0307 (SAC) content on the micromorphology and mechanical properties of Sn58Bi-xSAC0307 composite solder joints to meet the requirements of high integration and low-temperature packaging of devices and provide references for the application of composite solder joints.Design/methodology/approachSn58Bi and SAC0307 solder paste was mechanically mixed in different proportions to prepare Sn58Bi-xSAC0307/ENIG solder joints. The thermal properties, microstructure and mechanical properties of the composite solder joints were studied.FindingsAs SAC content in the solder increases, the balling temperature of SnBi-SAC solder gradually increases. The addition of SAC alloy reduces the grain size of large Bi-rich phase, and there are small-sized dispersed Bi and Ag3Sn particles in the bulk solder. The intermetallic compounds composition of the SnBi-xSAC/ENIG solder joint changes from Ni3Sn4 to (Ni, Cu)3Sn4 and (Cu, Ni)6Sn5 with SAC increasing. As the soldering temperature increases, the strength of all solder joints shows a rising trend. Among them, the shear strength of SnBi-20SAC solder joints at a reflow temperature of 150°C is approximately 37 MPa. As the reflow temperature increases to 250°C, the shear strength of solder joints increases to approximately 67 MPa.Originality/valueThis study provides a reference for the optimization of low-temperature solder composition and soldering process under different package designs.