Abstract
Radiation crosslinked ultrahigh molecular weight polyethylene (UHMWPE) have reduced the wear rate of the bearing surface in total joint arthroplasty and the incidence of peri-prosthetic bone loss due to wear particles. The oxidation potential afforded to the material by the trapped residual free radicals after irradiation was addressed in first generation crosslinked UHMWPEs by using thermal treatments such as annealing or melting after irradiation. Postirradiation melted crosslinked UHMWPE did not contain detectable free radicals at the time of implantation and was expected to be resistant against oxidation for the lifetime of the implants. Recent analyses of long-term retrievals showed it was possible for irradiated and melted UHMWPEs to oxidize in vivo but studies on the effects of oxidation on these materials have been limited. In this study, we determined the effects of in vitro aging on the wear and mechanical properties of irradiated and melted UHMWPE as a function of radiation dose and found that even small amount of oxidation (oxidation index of 0.1) can have detrimental effects on its mechanical properties. There was a gradual increase in the wear rate below an oxidation index of 1 and a drastic increase thereafter. Therefore, it was shown in a simulated environment that oxidation can have detrimental effects to the clinically relevant properties of irradiated and melted UHMWPEs.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call