Effects of porosity, fiber size, and layering sequence on sound absorption performance of needle‐punched nonwovens

Abstract

AbstractThe relationships between the material parameters, i.e., the fiber fineness, porosity, areal density, layering sequence, and airflow resistivity with the normal‐incidence sound absorption coefficient of nonwoven composites consisting of three layers have been studied. The monofiber or multifiber needle‐punched nonwovens included poly(lactic acid) (PLA), polypropylene (PP), glass fiber, and hemp fibers. Air flow resistivity was statistically modeled and was found to increase with decreasing fiber size and nonwoven porosity. The former models developed for glass fiber mats in the literature were found to be inconsistent with the air flow resistance of the nonwovens reported below. The effects of the layering sequence on air flow resistivity and sound absorption were obtained. It was found that when the layer including reinforcement fibers, i.e., hemp or glass fiber, faced the air flow/sound source, the air flow resistance and the absorption coefficient were higher than the case when the layer including reinforcement fibers was farthest from the air flow/sound source. The difference was more pronounced if there was a greater difference between the resistivity values of the constituent layers of the nonwoven composite. Sound absorption coefficient was statistically modeled in terms of air flow resistivity and frequency. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011