Abstract
The pore throat structure and microheterogeneous wettability of tight sandstone reservoirs are complex, which leads to varying asphaltene precipitation locations, contents, and distributions in different pores during CO2 flooding. Clarifying the heterogeneous wettability of different pore throat structures and their effects on asphaltene precipitation and adsorption is crucial for improving CO2 displacement efficiency. A series of experiments were conducted in this study, including X-ray diffraction (XRD), cast thin section (CTS), field emission scanning electron microscopy (FE-SEM), high-pressure mercury intrusion (HPMI), environmental scanning electron microscopy (E-SEM), nuclear magnetic resonance (NMR), and CO2 flooding experiments, to investigate the pore structure complexity of tight sandstone reservoirs of the Yanchang Formation in the Ordos Basin, China. Furthermore, we investigated the variations in microheterogeneous wettability across diverse pore-throat structures and elucidated the impact of heterogeneous wettability on asphaltene precipitation during CO2 flooding. The findings indicate that the type and configuration of pore throats are crucial factors influencing microheterogeneous wettability. The intergranular pores are dominated by mixed wetting, and most of the dissolution pores exhibit oil wetting. The surface of Illite shows drop-like water under E-SEM, which is mainly oil wetting, whereas the surface of chlorite shows film-like water, which is water wetting. The configuration of chlorite intercrystalline pores and intergranular pores shows water wetting, whereas the configuration of Illite intergranular pores and dissolution pores shows oil wetting. During the CO2 flooding process, asphaltene tends to be adsorbed in the intercrystalline Illite with dissolution pores, reducing the dissolution pore volume and blocking small pores, and the displacement efficiency becomes low. In addition, asphaltene precipitation also occurs in the pore configuration of chlorite intercrystalline and intergranular pores, causing a wetting reversal on hydrophilic mineral surfaces. This reversal increases the pore throat structure complexity but has less of an impact on the flooding efficiency. A high Illite content is more likely to lead to asphaltene precipitation, significantly influencing small pore structure and the oil displacement efficiency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.