Abstract
AbstractMicroscopic morphologies of reticular cracks in Nb-bearing pipeline surfaces are shown in this work. A decarburization layer, oxidized round spots, and the distributions of residual elements are each detected to better understand the mechanisms of reticular crack formations. The results show that reticular cracks are discontinuously distributed and filled with iron oxide. The oxidized round spots near the crack sides are larger and more intensive than steel matrix, with primary chemical compositions of Fe, Mn, and Si oxides. There is no obvious enrichment of Cu, Cr, or Sn near the crack zones. The formation of reticular cracks occurs prior to both decarburization and the formation of oxidized round spots. The ferrite potential (FP) of the examined pipeline steel is 1.05, which leads to a higher relative crack susceptibility. It is concluded that reticular cracks are generated during the continuous casting solidification process due to the extension of intergranular microcracks along grain boundaries under the abnormal conditions of the continuous casting process.
Highlights
Microscopic morphologies of reticular cracks in Nb-bearing pipeline surfaces are shown in this work
The ferrite potential (FP) of the examined pipeline steel is 1.05, which leads to a higher relative crack susceptibility
(1) Reticular cracks are discontinuously distributed and filled with iron oxide. Both a decarburization layer and oxidized round spots are detected on either side of the reticular crack, and the oxidized round spots near the crack sides are larger and more intense with primary chemical compositions of Fe, Mn, and Si oxides
Summary
Abstract: Microscopic morphologies of reticular cracks in Nb-bearing pipeline surfaces are shown in this work. A decarburization layer, oxidized round spots, and the distributions of residual elements are each detected to better understand the mechanisms of reticular crack formations. The results show that reticular cracks are discontinuously distributed and filled with iron oxide. The oxidized round spots near the crack sides are larger and more intensive than steel matrix, with primary chemical compositions of Fe, Mn, and Si oxides. The formation of reticular cracks occurs prior to both decarburization and the formation of oxidized round spots. The ferrite potential (FP) of the examined pipeline steel is 1.05, which leads to a higher relative crack susceptibility. It is concluded that reticular cracks are generated during the continuous casting solidification process due to the extension of intergranular microcracks along grain boundaries under the abnormal conditions of the continuous casting process
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
