Abstract
MgB 2 commercial powder was encased in a Ni sheath and fabricated into a monocore tape. Different kinds of metal powder, i.e., Ag, Ni, Cu, In and Sn, were mixed with the MgB 2 powder. The addition of low melting point metal powder, especially In, has been found to enhance appreciably the J c in MgB 2 tapes. The annealing at a low temperature yields further increase in the J c of tapes with In addition. The enhancement in J c by the In addition and the low temperature annealing reaches a factor of five. The In addition may improve the linkage among MgB 2 grains, which provides the improvement in J c and avoids a sintering treatment at high temperatures. The optimum amount of In addition to the MgB 2 core seems to be about 10 vol%. The effect of other metal powder addition is also described.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.