Abstract
MBS (0.1–2.0 wt%) composed of MgO–B2O3–SiO2 were added into the Li3Mg2NbO6 ceramics to achieve low temperature sintering. The effects of MBS on the sintering temperature, phase compositions, microstructure and microwave dielectric properties of Li3Mg2NbO6 ceramics were investigated systematically. The XRD results indicated that the sintered sample presented a single-phase without extra secondary phase. The microwave dielectric properties of Li3Mg2NbO6 ceramics were mainly dependent on the MBS additives. In the case of 0.5 wt% MBS additives, Li3Mg2NbO6 ceramics exhibited satisfying microwave dielectric properties with e r = 14.5, Q × f = 80,759 GHz, τ f = −20.7 ppm/°C sintered at 925 °C for 4 h.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
