Abstract
This study focused on the m-Aramid/p-Aramid blend ratio of the fabrics, clarified the quantitative relationship between UV exposure and strength retention, and developed a mathematical model to calculate tensile strength from an arbitrary amount of UV exposure energy. The results of tensile strength tests before and after UV exposure showed that the decrease in tensile strength due to UV degradation depended on the combination of p-Aramid and m-Aramid blend percentages. Tensile strength for all blend ratios decreased exponentially with UV exposure energy and was within the range of results for fabrics with p-Aramid 100% and m-Aramid 100%. The retention fraction of tensile strength, which represents the tensile strength after UV exposure relative to the initial tensile strength, decreased exponentially with increasing the fraction of UV exposure energy for all fabrics used in this study. Fitting the retention fraction of tensile strength to the fraction of UV exposure energy, two groups of fabrics were classified based on m-Aramid blends of 40% or more and 60% or less. This model can predict the tensile strength of firefighter clothing fabrics that retain high mechanical strength when exposed to UV light and design the strength of firefighter clothing with consideration of degradation over time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.