Abstract
ABSTRACTCold-rolled 6061 aluminium alloys are used to prepare semisolid billets by recrystallisation and partial melting. The effects of isothermal treatment parameters on the microstructures were investigated. The results indicated that the high isothermal holding temperature increases the experimental liquid fraction, average grain size and shape factor. A long isothermal holding time also increases the experimental liquid fraction and improves the spheroidisation degree of solid grains, but the average grain size also increases. Moreover, when the isothermal holding time at high temperature is increased, the size of intragranular liquid droplets increases, but their quantity decreases. The optimal isothermal holding temperature and time during semisolid isothermal treatment were 635°C and 5 – 10 min, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
