Abstract
NiCuZn ferrite ceramics were prepared by injection molding, debinding and sintering at 1150 °C. The effects of heating rate in thermal debinding on microstructure, bending strength and magnetic properties of sintered samples were investigated by scanning electron microscopy with energy-dispersive X-ray spectroscopy, X-ray diffraction, the Dual Column Tabletop Testing Machine, RF impedance Analyzer and B-H curve analyzer. The results showed the heating rate in thermal debinding played an important role on the sintered NiCuZn ferrite prepared by injection molding. When the heating rate in thermal debinding was quick above 1.2 °C/min in the lager cuboid samples, CuO precipitate was found at the grain boundary of ferrite and the intergranular fracture occurred, which was different from the normal transgranular fracture under the condition of slow heating rate. Furthermore, the density, bending strength, permeability and core loss of the sintered samples were improved with the decrease of heating rate. The influencing mechanism of thermal debinding on the difference was also discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.