Abstract
This work focused on enhancing the comprehensive performance of a novel hollow glass microsphere reinforced Mg-15Al-5Zn-1.5Cu composites through heat treatment. Optical microscopy and scanning electron microscopy were employed to characterize the microstructure evolution. Using a combination of compression tests, immersion tests and electrochemical tests, the effects of heat treatment on mechanical properties, and degradation behavior, as well as the influence mechanisms were comprehensively examined. The results demonstrated that variations in the quantity and shape of the Mg17Al12 and Al2CuMg phases were primarily responsible for changes in the mechanical properties and degradation rate of the composites. After solution treatment at 420 °C for 20 h and aging at 200 °C for 24 h, the composites exhibited a more uniform microstructure and distribution of secondary phases, and the segregation and residual stress were also eliminated. This endowed the composites with a desirable overall performance: ultimate compressive strength of 435 MPa, hardness of HB 124, fracture strain of 8.3%, and degradation rate of 151 mg/(cm2·d) at room temperature, which made them more beneficial to the applications involving degradable downhole tools.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Transactions of Nonferrous Metals Society of China
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.