Effects of Er: YAG laser irradiation on wettability, surface roughness, and biocompatibility of SLA titanium surfaces: an in vitro study

Abstract

The erbium: yttrium-aluminum-garnet (Er: YAG) laser has been introduced as an effective method in the decontamination of implant surfaces. Data concerning the effects of the Er: YAG laser on the biological and surface properties of titanium are conflicting. Cellular behavior is greatly affected by surface properties, including composition, roughness, wettability, and morphology of the titanium surface. The aim of this study was to investigate the influence of the Er: YAG laser on the biocompatibility, surface roughness, and wettability of sandblasted and acid-etched (SLA) titanium surfaces. Twenty-one SLA titanium disks were irradiated by the Er: YAG laser at a pulse energy of 100mJ, with a pulse frequency of 10Hz under water irrigation for 1min. Cell viability, surface roughness, and wettability alterations were evaluated. Thirteen nonirradiated SLA disks were used as the control groups. Human osteoblast-like SaOs-2 cells were seeded onto the disks in culture media. Cell viability was evaluated using the methylthiazol tetrazolium assay. The surface roughness and wettability of the test and control groups were measured using profilometer and tensiometer devices, respectively. A significantly higher cell viability rate was observed in the test group (p = 0.032). The surface roughness was significantly reduced in the test group compared with the control group (p = 0.008). The surface wettability was significantly higher in the test group (p = 0.004). Within the limits of this study, the application of the Er: YAG laser with the previously described properties did not appear to have adverse effects on the biocompatibility of the SLA titanium surfaces. Application of this laser decreased the surface roughness and increased the wettability of the SLA titanium surfaces.