Effects of electrode materials on freezing of supercooled water in electric freeze control

Abstract

In order to clarify effects of electric charge on freezing of supercooled water, experiments were carried out with various kinds of electrodes in supercooled water. Water sample was kept in a test tube and cooled down at a constant cooling rate. When the water sample was maintained under a supercooling state, an electric charge was applied to the water sample with a small electric current. The degree of supercooling was measured continuously. Then the degree of supercooling at freezing was determined. Six kinds of materials were used for electrodes. Those materials were Aluminum, Copper, Argentum, Aurum, Platinum and Carbon. It was found that the effects of electric charge were distinct according to the material used for electrodes. The degree of supercooling at freezing was the lowest in the case of Aluminum. On the other hand, the highest value of the degree of supercooling at freezing was obtained in the case of carbon. The reason for the difference in the degree of supercooling at freezing by six materials was discussed.