Abstract
Open cavities with different door-opening angles are investigated using high-speed schlieren visualization and dynamic pressure measurements in hypersonic flow with a freestream Mach number of 6. With the help of numerical simulations, the shear layer deformation and pressure increase in the cavities due to the impingement of the door-leading-edge shocks are identified via comparison with those in the cavity without doors. As the door-opening angle decreases from 90°, the shear layer above the forepart of the cavity is gradually raised by the high pressure in the cavity. When the door-opening angle decreases to 30°and 15°, the boundary layer on the upstream flat plate of the cavity separates, and separation shock is observed. The doors enhance the instability of the cavity flow and increase the pressure fluctuations in the cavities. A new oscillation pattern, referred to as coupled oscillation, is observed in the cases with separation on the upstream flat plate, in which the separation shock oscillates at the same dominant frequency as the flow inside the cavity. Compared with the cavity without doors, this coupled oscillation causes a lower oscillation frequency and a larger overall sound pressure level. Cross-correlation analyses between pressure signals indicate that the disturbances generated at the trailing edge of the cavity can propagate to the separation on the upstream flat plate and cause coupled oscillation of the separation shock. The fundamental frequencies of the coupled oscillations can be normalized to approximately the same Strouhal number as that of the cavity without doors. These findings support that the oscillation mechanisms of hypersonic cavities without and with doors are primarily dominated by acoustic feedback.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.