Effects of deposition conditions of Al and Ti underlayer on electromigration reliability for deep-submicron interconnect metallization

Abstract

We have studied the effects of Ti underlayer (collimated Ti vs. standard Ti) and Al deposition power (12 KW vs. 6 KW) on the electromigration (EM) lifetime of bottom-Ti/Al-0.5wt.%Cu/Ti/TiN-top stack. The (002) texture of standard Ti (s-Ti) was stronger than that of collimated Ti (c-Ti). The Al stack prepared with s-Ti underlayer, which had the stronger Al (111) texture and more uniform grain size distribution, showed better EM lifetime than the same with c-Ti underlayer, independent of the Al deposition power. The Al stack prepared with an Al deposition power of 6 KW was also found to show better EM lifetime than the same with a 12 KW deposition power, independent of the type of Ti underlayer. Longer deposition time for low power sputtering resulted in the stronger Al (111) texture, larger median grain size, and more uniform Ti−Al reaction layer. Finally, the effects of Ti underlayer and Al deposition power on the EM lifetime of Al-0.5%Cu films could be well explained by the grain size distribution and Al (111) texture, which is closely related to the underlying-Ti (002) texture.