Abstract

Captured CO2 from the manufacturing industries and power generation sources are not pure and may contain usually some amount of impure components, which affect the flow dynamics of the CO2 in the pipelines. Major component of impurities includes N2, H2, H2S, O2, Ar etc., depending on the capture technology used for the removal of CO2 [1]. To design efficient CO2 pipeline transportation systems, it is imperative to understand the effect of these impure components on the flow behaviour. The simulation of the effect of CO2 binary mixture on pipeline performance is carried out in this study. The steady-state flow in pipeline is described by a set of parabolic mass, momentum and energy conservation equations. To solve the set of equations subject to the boundary and the inlet conditions of the pipeline, the nonlinear algebraic solver library DNSQE in Fortran is used to study the behaviour of 90 vol % CO2, and 10 vol % single impure component (N2, H2, H2S, O2 and Ar). The pertinent fluid properties are calculated using the Peng-Robinson (PR) equation of state. The presence of impure components changed the properties of the flowing fluid. From the results, H2 shows the most significant impact on the performance of CO2 pipeline as the highest pressure drop has smaller density and greater flow velocity against other CO2 streams. The results also show that Ar had the mildest effect followed by O2, N2 and CO. In the case of H2S, the flow parameters are found to be nearly identical to those for pure CO2.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call