Effects of Back-Gate Bias on the Mobility and Reliability of Junction-Less FDSOI Transistors for 3-D Sequential Integration

Abstract

Low thermal budget junction-less transistors with back-gate are fabricated as top-tier devices for 3-D sequential integration. The impact of back-gate bias on carrier mobility and bias temperature instability (BTI) reliability is investigated. The back-gate bias is shown to modulate the carrier mobility: specifically, mobility is increased under forward back-gate bias (FBB), which is ascribed to the carrier redistribution from the front-gate interface toward back-gate interface. Regarding BTI reliability, if a back-gate bias ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {BG}}{)}$ </tex-math></inline-formula> is applied only during ON-state and a constant front-gate stress <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {G}}$ </tex-math></inline-formula> is used, BTI reliability is not influenced by the applied <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {BG}}$ </tex-math></inline-formula> (due to its negligible impact on the front-gate oxide field, <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${E}_{\text {ox}}{)}$ </tex-math></inline-formula> . Therefore, supplying an FBB during ON-state can be used to adjust device performance—as <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {BG}}$ </tex-math></inline-formula> modulates the channel current through <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {th}}$ </tex-math></inline-formula> and mobility—without reliability penalty. On the other hand, if the back-gate bias is applied during both ON- and OFF-states, while a constant stress <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {ov}}$ </tex-math></inline-formula> is maintained by adjusting the front-gate <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {G}}$ </tex-math></inline-formula> [i.e., <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {G}}$ </tex-math></inline-formula> – <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {th}}{(}{V}_{\text {BG}}{)}$ </tex-math></inline-formula> is kept constant under different <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${V}_{\text {BG}}$ </tex-math></inline-formula> ’s], the BTI reliability can be improved under FBB (due to a reduced <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${E}_{\text {ox}}$ </tex-math></inline-formula> in the front-gate) without performance loss. The latter property can be used to improve the device reliability under circuit operation.