Effects of Annealing for Strength Enhancement of FDM 3D-Printed ABS Reinforced with Recycled Carbon Fiber.

Abstract

This study investigates the effect of annealing on the mechanical properties of fused deposition modeling (FDM) 3D-printed recycled carbon fiber (rCF)-reinforced composites. In this study, filaments for FDM 3D printers are self-fabricated from pure acrylonitrile butadiene styrene (ABS) and ABS reinforced with fiber content of 10 wt% and 20 wt% rCF. This study explores the tensile and flexural properties as a function of the annealing temperature and time for the three different fiber content values. In addition, dimensional measurements of the shape changes are performed to determine the suitability of applying annealing in practical manufacturing processes. The results show that annealing improves the mechanical properties by narrowing the voids between the beads, which occur during the FDM process, and by reducing the gaps between the fibers and polymer. Following annealing, the largest tensile and flexural strength improvements are 12.64% and 42.33%, respectively, for the 20 wt% rCF content samples. Moreover, compared with the pure ABS samples, the annealing effect improves the mechanical properties of the rCF-reinforced samples more effectively, and they have higher dimensional stability, indicating their suitability for annealing. These results are expected to expand the application fields of rCF and greatly increase the potential use of FDM-printed parts.