Abstract
The effects of ambient humidity and temperature on the NO2 sensing characteristics of WS2/graphene aerogel (WS2/GA) composite are investigated. In order to probe the gas sensing performances of WS2/GA, the sensor is fabricated by integrating WS2/GA with a microfabricated two-electrode device. The WS2/GA is characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and nitrogen porosimetry. This hybrid nanomaterial is found to improve the selectivity to NO2, compared to control graphene and WS2 aerogels. The NO2 sensing performance of the WS2/GA-based sensors is investigated under different relative humidities (0–60%), and ambient temperatures (room temperature (RT) to 180 °C). In all cases, the sensors exhibit p-type behavior. In dry atmosphere, faster response and better recovery are obtained with increasing temperature, reaching optimum sensing performance around 180 °C. At room temperature, interestingly, humidity is found helpful for enhancing the response and recovery of the sensor to NO2. Detection limits in the range of 10–15 ppb NO2 were determined. A possible gas sensing mechanism for this composite aerogel is proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.