Effects of a silane coupling agent on the exfoliation of organoclay layers in polyurethane/organoclay nanocomposite foams?

Abstract

AbstractAn attempt was made to synthesize polyurethane (PU)/organoclay nanocomposite foams with high thermal insulation properties. The organoclay was modified by polymeric 4,4′‐diphenylmethane diisocyanate (PMDI) with a silane coupling agent. The structure of the organoclay‐modified PMDI with the silane coupling agent was determined by Fourier transform infrared spectroscopy and nuclear magnetic resonance. Transmission electron micrographs and wide‐angle X‐ray diffraction patterns showed that the interlayer distance increased for the PU/organoclay nanocomposites with the addition of the silane coupling agent. It was expected that the distance between the organoclay layers would increase and that the organoclay would be dispersed on a nanoscale in the PU matrix because of the organic/inorganic hybrid bond formation between the organoclay and silane coupling agent. Compressive and flexural strengths of the PU/silane coupling agent/organoclay nanocomposite foams were similar to those of the PU/organoclay nanocomposite foams. However, the thermal conductivity appreciably decreased from 0.0250 to 0.0230 W/m h °C in the PU/silane coupling agent/organoclay nanocomposite foams. Scanning electron micrographs showed that the cell size of the PU/silane coupling agent/clay nanocomposite foams also decreased. On the basis of these results, it is suggested that the smaller cell size and lower thermal conductivity of the PU/silane coupling agent/organoclay nanocomposite foams were mainly due to enhanced exfoliation of the organoclay layers by the silane coupling reaction. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008