Abstract
PurposeThis study aims to investigate the effect of three-dimensional (3D)- bioplotted polycaprolactone (PCL) scaffold geometry on the biological and mechanical characteristics of human adipose-derived stem cell (hASC) seeded constructs.Design/methodology/approachFour 3D-bioplotted scaffold disc designs (Ø14.5 × 2 mm) with two levels of strand–pore feature sizes and two strand laydown patterns (0°/90° or 0°/120°/240°) were evaluated for hASC viability, proliferation and construct compressive stiffness after 14 days of in vitro cell culture.FindingsScaffolds with the highest porosity (smaller strand–pore size in 0°/120°/240°) yielded the highest hASC proliferation and viability. Further testing of this design in a 6-mm thick configuration showed that cells were able to penetrate and proliferate throughout the scaffold thickness. The design with the lowest porosity (larger strand–pore size in 0°/90°) had the highest compression modulus after 14 days of culture, but resulted in the lowest hASC viability. The strand laydown pattern by itself did not influence the compression modulus of scaffolds. The 14-day cell culture also did not cause significant changes in compressive properties in any of the four designs.Originality/valuehASC hold great potential for musculoskeletal tissue engineering applications because of their relative ease of harvest, abundance and differentiation abilities. This study reports on the effects of 3D-bioplotted scaffold geometry on mechanical and biological characteristics of hASC-seeded PCL constructs. The results provide the basis for future studies which will use this optimal scaffold design to develop constructs for hASC-based osteochondral tissue engineering applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.