Abstract
In this study, natural Akadama clay was used for Cr (VI) removal from aqueous solution. Batch experiments were carried out to investigate the effect of contact time, initial pH, and adsorbent dose on Cr (VI) adsorption. Results showed that Cr (VI) adsorption on natural Akadama clay reached equilibrium in 180min. The Cr (VI) removal efficiency of 46.8% without pH adjustment increased to 73.8% at the optimum initial pH of 2. The maximum adsorption capacity was 4.29mgg−1 at an initial concentration of 50.0mgL−1 and adsorbent dosage of 5gL−1. The equilibrium data fitted Freundlich isotherm better than Langmuir isotherm, and they were well explained by pseudo-second-order kinetic model. Adsorption mechanism analysis proved that electrostatic adsorption dominated during the removal process. Results from this study demonstrate that natural Akadama clay has the potential to be an efficient adsorbent for Cr (VI) adsorption compared to other natural mineral adsorbents.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.