Abstract
Steel in the galvannealed condition is preferred over simple galvanised steel for autobody components due to its superior corrosion resistance and relatively easy weldability. However, during resistance seam welding, the area at the weld nugget completely loses its zinc coating due to melting. On the other hand, the zinc coating in the heat affected zone (HAZ) is not totally removed although it is affected by the heat input consequent from the welding process. Although this is potentially a problem, the weld nugget has generally less probability of exposure to the open atmosphere as it is usually enveloped within the HAZ. In the present investigation, a reduction in zinc coating thickness in the HAZ from 9 to 1·5 μm has been observed with increasing resistance weld heat input from 775 to 1310 kJ. This reduction is responsible for increasing the corrosion rate from ∼1 to ∼5 mpy. Therefore, in order to reduce corrosion at the HAZ, the weld heat input has to be restricted.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.