Abstract
Ni-Cu/WC-12Co composite coatings with 0–30 wt% of WC-12Co were prepared by laser cladding. SEM, EDS, XRD were used to study the changes of microstructure and phase composition. The microhardness, wear and corrosion resistance performance of composite coatings were analyzed by the microhardness tester, wear tester and electrochemical workstation. The results show no cracks in the four composite coatings. With increasing WC-Co content, the microhardness of the composite coating increases. The formation of (Co, Cu) compounds and WC improves the wear resistance of composite coating significantly. When the proportion of WC-12Co is 20 wt%, the wear resistance of the composite coating is the best, and the wear rate is 10% of the NiCu alloy. Moreover, the 30 wt% WC-12Co composite coating corrosion current density is 0.1 times of the NiCu alloy in 3.5 wt% NaCl solution at room temperature.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
