Abstract
Abstract. Objectives The purpose of this work is to study the dependency of the fluidity of foam concrete mixtures on the water-cement ratio when using various local aggregates and wastes from the Republic of Dagestan and comparing the fluidity characteristics of mixtures for the same watercement ratios. During the experimental work, the following materials were used: M500 cement, siliceous filler (quartz sand from the deposit in the Kumtorkalinsky district of the Republic of Dagestan with a low modulus of grain size, various synthetic foaming agents), perlite sand, ground expanded clay sand (Kizilyurt, Republic of Dagestan), stone crushing screenings (Kizilyurt, Republic of Dagestan). Methods During the production of foam concrete, a method was used in which foam was prepared in the foam generator, then a solution was prepared from the cement, siliceous component (filler), and water. Then the foam was mixed with the solution in the foam concrete mixer up to the set of the appropriate multiplicity. (The multiplicity in this case was defined as ratio of the volume of the solution of the foam concrete mixture after mixing to the volume of the solution before mixing. During the studies, the water-cement mixture ratio for all three kinds of filler (expanded clay sand, quartz sand from the deposit of the Kumtorkalinsky region, and perlite) was determined. The fluidity index of the foam concrete mixture was determined using a Suttard's viscometer. Results The results of the research indicated that with an increase in the water-cement ratio for all three types of filler (expanded clay sand, quartz sand from the Kumtorkalinsky region and perlite), the foam concrete mixture fluidity index will increase. Conclusion With the same fluidity index values, the mixture with perlite filler has the lowest fluidity, which in turn affects the further structure formation of the foam concrete, allowing the optimal composition with the specified properties to be selected.
Highlights
The purpose of this work is to study the dependency of the fluidity of foam concrete mixtures on the water-cement ratio when using various local aggregates and wastes from the Republic of Dagestan and comparing the fluidity characteristics of mixtures for the same watercement ratios
The foam was mixed with the solution in the foam concrete mixer up to the set of the appropriate multiplicity
Проведенные исследования показали, что формированием ячеистой структуры пенобетона можно эффективно управлять с помощью направленного регулирования реологических свойств за счет изменения характеристик расхода пены и заполнителей
Summary
Results The results of the research indicated that with an increase in the water-cement ratio for all three types of filler (expanded clay sand, quartz sand from the Kumtorkalinsky region and perlite), the foam concrete mixture fluidity index will increase. Одним из путей повышенияэффективности и качества, снижения затрат при производстве пенобетона является применение местного сырья и отходов производства предприятий, а также изучение реологических характеристик [5]. Также значимым является решение проблемы повышения качества пенобетонов, изучение влияния свойств пены, режимов работы оборудования на свойства пенобетона, проблемы использования легких наполнителей [2].
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Herald of Dagestan State Technical University. Technical Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.