Study on Physical and Mechanical Properties of Micro-Cement Grouting Materials with Different Water-Cement Ratio

Abstract

The water-cement ratio is one of the key parameters of grouting materials, which greatly affects the working performance and mechanical properties of grouting materials. This paper studies the physical properties, such as density, fluidity, consistency, bleeding rate, and stone rate, and the mechanical properties of flexural and compressive strength of micro-cement grouting materials with a water-cement ratio of 0.8:1, 1:1, 1.5:1 and 2.0:1 are investigated through a variety of indoor experiments. The results show that with the gradual increase of water-cement ratio, the density, consistency value, stone rate, flexural strength, and compressive strength of micro-cement grouting material gradually decrease, while the fluidity and bleeding rate of micro-cement slurry gradually increases. Although the slurry with a water-cement ratio of 1.5:1 and 2:1 has good fluidity, the high bleeding rate and the low stone body strength result in more water injected into the reinforced formation and low reinforcement strength. On the contrary, the slurry with a water-cement ratio of 0.8:1 has a low bleeding rate and high stone body strength, but low fluidity. The grouting performance and mechanical properties of the slurry with a water-cement ratio of 1:1 are relatively balanced. This study provides a basis for the subsequent on-site ultra-fine cement grouting project. A reasonable water-cement ratio can be selected according to the specific needs to ensure the reinforcement quality and safety of the grouting operation.