Effect of ultrasound and chemical pretreatment on drying characteristics and quality attributes of hot air dried pineapple slices.

Abstract

Drying of food materials is a time consuming activity making the process cost and energy intensive and hence, several pretreatments are used to improve the drying rate. The present study aims to study the effect of potassium metabisulphite (KMS solution, 0.25% w/v) and ultrasound (20 and 30min) pretreatment on hot air drying characteristics and quality of pineapple slices. The results indicated that pretreated samples provided higher drying rate, enhanced moisture diffusivity, brighter color and lower hardness than that of untreated dried sample. It was observed that KMS and ultrasound pretreatment for 20 and 30min reduced the drying time by 23.8%, 19% and 14.3%, respectively. Further, ten thin layer drying models were applied to the experimental drying data and logarithmic model was best fitted to explain the drying behavior of pretreated and untreated samples. Additionally, the effect of shrinkage on moisture transfer mechanism was also studied. Results highlighted that instantaneous moisture diffusivity was increased during drying while shrinkage was not accounted. However, shrinkage consideration reduced the average moisture diffusivity values by 72-83%. Overall color change (13.95 ± 0.92) and browning index (36.02 ± 2.45) were found to be lowest in ultrasound (30min) pretreated dried sample, highlighting better color stability. Scanning electron microscopy presented noticeable effects of pretreatment on alterations of microstructure of pineapple slices. It can be interpreted that KMS pretreatment was found to be more effective for improvement of drying characteristics of pineapple slices as compared to ultrasound pretreatment.