Effect of ultrasonic-assisted impregnation parameters on the preparation and interfacial properties of MWCNT/glass-fiber reinforced composites

Abstract

AbstractIn this study, an ultrasonic-assisted impregnation method was employed to deposit carboxyl multiwalled carbon nanotubes (MWCNTs) onto the E-glass fiber fabric (GFf) for the preparation of the MWCNT-GFf reinforcer. The effects of ultrasonic power, duration and temperature on the dispersion of MWCNTs onto GFf were investigated, and the mechanical properties, interlaminar adhesion, and dynamic viscoelasticity of the resulting MWCNT-GFf-reinforced composites (MGCs) were evaluated. The results indicated that an effective dispersion of MWCNTs onto GFf without obvious breakage of the MWCNTs was achieved under an ultrasonic power of 600 W, duration of 6 min, and processing temperature of about 0°C. Compared with the GFf-reinforced composite, the tensile strength, flexural strength and interlaminar shear strength of the MGCs exhibited maximum increments of 38.4%, 34.6% and 47.1%, respectively. Moreover, the storage moduli and glass-transition temperatures of the MGCs were significantly enhanced. The ultrasonic parameters were of key importance for dispersing MWCNTs onto GFf and improving the interfacial properties of the composites.