Abstract
Ti3SiC2, a MAX-phase ceramic, amalgamates metallic and ceramic traits, delivering exceptional electrical conductivity and corrosion resistance. In this research, Ti3SiC2 composite coatings were applied to 316 L stainless steel via low-power atmospheric plasma spraying (APS), aiming to bolster the electrical and corrosion resistance attributes of bipolar plates (BPPs). A power input of 15 kW notably enhanced coating density, yielding a Ti3SiC2 concentration of 19.2 wt% in the coating. Extremes in the spraying power led to either diminished deposition efficiency or a reduction of Ti3SiC2 mass fraction below 5 wt%. Tafel curves demonstrated that specimens with elevated Ti3SiC2 mass fractions exhibited robust corrosion resistance, characterized by a self-corrosion potential of −162.5 mV and a self-corrosion current density of 1.7217 × 10−6 A·cm−2. Moreover, the interfacial contact resistance (ICR) between the coating and the gas diffusion layer was remarkably low (down to 5.49 mΩ·cm−2), indicating enhanced surface electron transfer with increasing Ti3SiC2 mass fractions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
