Abstract
The present research work shows the effect on the carbonation of Portland cement-based mortars (PC) with the addition of green materials, specifically residues from two groups: agricultural and industrial wastes, and minerals and fibres. These materials have the purpose of helping with the waste disposal, recycling, and improving the durability of concrete structures. The specimens used for the research were elaborated with CPC 30R RS, according to the Mexican standard NMX-C-414, which is equivalent to the international ASTM C150. The aggregates were taken from the rivers Lerma and Huajumbaro, in the State of Michoacan, Mexico, and the water/cement relation was 1:1 in weight. The carbonation analyses were performed with cylinder specimens in an accelerated carbonation test chamber with conditions of 65 +/− 5% of humidity and 25 +/− 2 °C temperature. The results showed that depending on the PC substitutions, the carbonation front advance of the specimens can increase or decrease. It is highlighted that the charcoal ashes, blast-furnace slags, and natural perlite helped to reduce the carbonation advance compared to the control samples, consequently, they contributed to the durability of concrete structures. Conversely, the sugarcane bagasse ash, brick manufacturing ash, bottom ash, coal, expanded perlite, metakaolin, and opuntia ficus-indica dehydrated fibres additions increased the velocity of carbonation front, helping with the sequestration of greenhouse gases, such as CO2, and reducing environmental pollution.
Highlights
In the world, the most employed construction material is the hydraulic concretePortland cement (PC)
All the additions were compared with control samples elaborated with cement CPC 30 R RS according to the Mexican code NMX-C-414 [61], directly related with cement Type 4 of the international standard ASTM C-150 [62]
From the eleven total materials studied in this research as partial substitutions of Portland cement-based mortars (PC)
Summary
The most employed construction material is the hydraulic concrete. Due to its great mechanical performance, low cost, durability and versatility, PC is used for all types of structures and construction purposes. It can take any geometric form or design, adapting to the formworks or shoring, later curing and acquiring the desired mechanical resistance. Concrete consists of coarse aggregate (gravel), fine aggregate (sand), water, PC, and eventually different admixtures. Concrete transforms into an artificial rock material. If it is reinforced with steel cores, it is named reinforced concrete; this composite material combines the major uniaxial compression resistance of concrete
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.