Abstract
Oscillating and conventional linear laser welding were conducted to enhance the bonding strength of dissimilar aluminum alloys. The effect of lap joint configuration on porosity, microstructure, and mechanical properties of laser-welded dissimilar aluminum alloy joints was investigated. It was found that the solidification rate of the melt pool was the dominant factor in the difference in porosity for oscillating laser-welded joints with different lap joint configurations. The main precipitated phase in welds with different lap joint configurations was eutectic Si, and the proportion of eutectic Si was higher in oscillating laser welds than in linear laser welds. The elemental distribution in oscillating laser welds was more uniform. The strengthening mechanism for tensile shear strength of oscillating laser welded lap joints was analyzed. The improved tensile shear strength and elongation were attributed to the reduced porosity and solid solution strengthening for the oscillating laser welding. The tensile strengths of the two lap types of oscillating laser welded joints increased by 25.1 MPa and 34.5 MPa, and the elongation increased by 0.7% and 4.5%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
