Abstract
To enhance the resistance to wear of Co matrix alloy as high-temperature hot-end parts, the Co-based composites reinforced by strontium sulfate (4.0, 9.0 and 14.0 wt%) were prepared by using a powder metallurgy technology (P/M). The effects of SrSO4 on the microstructure, phase and tribological properties of composites were systematically investigated. The tribological behaviors of Co-based composites were tested from room temperature to 800 °C against Si3N4 ball by a ball-on-disk tribo-tester. The results indicated that SrSO4 decomposed during sintering, and the tribological properties of composites were improved by the addition of SrSO4. The composite with 9.0 wt% SrSO4 had favorable tribological behavior, which was attributed to the in-situ synthesized solid lubricants and lubricating film formed on the contact surfaces.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
