Abstract
Spindle-controlled variable-geometry ejectors can adjust the system capacity to meet varying load requirements in transcritical-CO2 refrigeration systems. The present study numerically explores the effect of spindle position on the performance and flow characteristics of a controllable two-phase CO2 ejector. Spindle-controlled ejectors achieved entrainment ratios higher than that of fixed geometry ejector. Motive and suction flows exhibited high sensitivity to the spindle position near the critical operating range because of the transition between operating modes. The two-phase and shock characteristics associated with ejector flow and the variations observed for different spindle positions are discussed. Critical discharge pressures and entrainment ratios are estimated for various spindle positions. The critical compression and entrainment ratios correlate with the respective normalized spindle position in the ejector. The impact of the effective nozzle throat area on the flow entrainment range and achievable pressure lift is investigated. The results showed that the critical entrainment ratio bears a common linear relationship with the critical compression ratio for all positions of the spindle. The study relates the most significant performance and geometric parameters of the spindle-controlled two-phase CO2 ejector.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
