Abstract
In this study the effect of micro-voids on the superelastic–plastic behavior of shape memory alloys is investigated. A new constitutive model for porous shape memory alloys, based on the Gurson–Tvergaard–Needleman formulation, is proposed. The model is able to reproduce both forward and reverse stress induced phase transformation, as well as plastic deformation. In addition, the model accounts for the presence of micro-voids and void-growth through a void volume fraction. A one dimensional implementation has been conducted, and results from the new constitutive model is compared with finite element unit-cell analyses. The model does well in reproducing results from unit-cells with void volume fractions f0<0.05. However, some discrepancy is found for void volume fractions f0⩾0.05 that can be attributed to the highly inhomogeneous stress field in the unit-cells which the new model does not account for. The main results show that even for relatively small micro-voids the stress at which transformation and plastic yielding is initiated is lowered. Also, the presence of micro-voids leads to a narrowing of the stress–strain hysteresis which affects the amount of energy dissipated during a superelastic cycle.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.