Abstract
This study presents an experimental study of similar reactive powder concrete (RPC) cylinders with different sizes subjected to axial impact loading. Dynamic compressive experiments were conducted on two dimensional RPC specimens using split Hopkinson pressure bar device. 54 hybrid fiber-reinforced RPC samples with 2% steel fiber and 0.2% polypropylene (PP) fibers contents by volume were characterized at strain rates from 107 to 356 s−1. Results from this and previous studies are analyzed to comprehensively investigate the effect of RPC specimen size on dynamic compressive performance. A series of quantitative analyses examining the relationship between dynamic properties and specimen size, strain rate, and steel fiber were conducted. Dynamic increase factor (DIF) of RPC compressive strength for specimens with larger diameters was consistently greater than RPC specimens with smaller diameters when the length to diameter ratio (l/d) was constant. RPC specimen size exhibited no visible effect on the critical strain DIF. Critical strain DIF increased with increasing strain rate and decreasing steel fiber addition. Critical damage variables of RPC specimens of greater size were higher than that of smaller sizes. Under identical strain rates, RPC specimen size had no visible effect on the DIF of Young's modulus or energy absorption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
