Effect of sodium hydroxide treatment on the fracture toughness of luffa natural fiber reinforced epoxy epikote 828

Abstract

AbstractMicro‐sized luffa natural fibers (MLNFs) were derived from raw luffa natural fibers from Vietnam by undergoing treatment with sodium hydroxide. This study examined the impact of sodium hydroxide concentration, temperature, and treatment duration on the fracture toughness of epoxy resin 828 reinforced with MLNFs. The results showed that the fracture toughness of the composite, as measured by the critical‐stress‐intensity factor (KIC) and Izod impact strength, was improved after the treatment of the MLNFs with sodium hydroxide. Specifically, with the optimal sodium hydroxide treatment parameters of 6% NaOH at 70 °C for 6 h, the critical‐stress‐intensity factor increased by 93% (from 2.0 to 3.86 MPa m1/2) and the Izod impact strength rose by 44.6% (from 3.81 to 5.51 kJ/m2). The thermal properties and surface structure of MLNFs treated with NaOH were analyzed using thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) images.