Abstract
The influence of sizing agent on interfacial shear strength (IFSS) of carbon fiber/epoxy (CF/EP) and carbon fiber/bismaleimide (CF/BMI) was investigated. Since sizing agent can alter physicochemical properties of CF surface, possible affecting factors, including sizing reactivity, chemical reactions between sizing and resin, wettability of fiber with resin, fiber surface roughness, and chemical composition of fiber surface, were discussed. It is found that contact angle of fiber with resin and sufficient chemical reactions between sizing and resin reveal strong correlation with the interfacial adhesion of CF/EP and CF/BMI, while the effect of surface roughness and the amount of oxygen on the fiber surface are relatively weak. Due to EP type of the composition, the sizing agent tends to improve the wettability of CF with EP, while goes against for the fiber with BMI. POLYM. COMPOS., 254–261, 2016. © 2014 Society of Plastics Engineers
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have