Abstract
Reconsolidation of thermally spray formed (plasma and high velocity oxyfuel spraying) hypereutectic Al–Si nanocomposites with multiwalled carbon nanotube (MWCNT) reinforcement was carried out by inert atmosphere sintering for prolonged time periods. The sintering treatment resulted in the removal of porosity and residual stress, and increase in size and volume fraction of primary Si particles in the Al–Si matrix. The morphology of multiwalled carbon nanotubes in sintered nanocomposites remained unchanged after sintering. The interfacial ultrathin product layer of silicon carbide between MWCNT reinforcement and Al–Si matrix was unaltered. Microhardness and elastic modulus of the sintered nanocomposites were influenced by combined effect of multiple factors, i.e. reduction in porosity, residual stress removal and MWCNT distribution. Overall improvement of microhardness and elastic modulus of the sintered nanocomposites was observed. The experimentally measured elastic modulus values were compared with theoretically estimated values using micromechanics models.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
