Effect of roughness on the running-in behavior and tribofilm formation of carbon fiber reinforced PTFE composite in trace moisture environment

Abstract

Counterface roughness is known to affect the tribological behavior of carbon fiber reinforced PTFE. However, the effect of roughness in trace moisture environments has not yet been extensively investigated. In this study, the tribological behavior and tribofilm formation were evaluated for a carbon fiber reinforced PTFE composite sliding in a trace moisture environment against 34CrNiMo6 steel counterfaces with different roughness. Tribotests were conducted with a three-pin-on-disc tribometer at a sliding velocity of 2.2 m/s and in a nitrogen environment with moisture content controlled to 11 ppm. Generally, smoother counterfaces gave lower wear, both during running-in and steady-state. Contrarily, the coefficient of friction was only affected by roughness during running-in. Surface analysis from different stages of running-in were done to elucidate the formation of tribofilms and their different characteristics. For the rough countersurface, a loosely adhered transfer film is transitionally formed at the beginning of sliding to enable the formation of a persistent transfer film. Contrarily, for the case of a smooth countersurface, the formation of a persistent transfer film is initiated from the start. Similarly for the rough and smooth countersurface, a micrometer thick tribofilm with excellent low friction properties is observed on the PTFE composite after running-in.