Abstract
The effect of constitutive parameters and microstructure on the kinematic and constitutive responses within grains in a crystal plasticity finite element (CPFE) simulation of a polycrystalline titanium alloy are compared with experimental results. The simulation of a Ti-5Al-2.5Sn sample deformed in uniaxial tension at room temperature used a phenomenological power-law based CPFE model, which includes four families of slip systems commonly observed in structural metals with a hexagonal lattice structure. The experimentally characterized microstructure patch was approximated by a quasi-3D columnar grain structure and by a more realistic 3D representation. The quasi-3D microstructure was generated by extending the EBSD characterized surface microstructure in the depth direction, while the 3D microstructure was built based on subsurface orientation information acquired using differential-aperture X-ray microscopy (DAXM). The effect of grain morphology and constitutive parameters on simulation results are compared in terms of stress–strain responses and lattice reorientation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have